Hospital: Asbestos Containment


100-year-old slab below grade. Adhesive contained asbestos and was removed and concrete was Chemically ebated. The concrete was heavily contaminated.


  1. Shot blast or grind concrete then cap concrete with solid epoxy with below-grade moisture vapor technology then apply primer to the epoxy.
    • Total steps: 3
    • Approx Cost: $6.00sf >

  2. Install S3 Surface Prep and Moisture Shield. Then install 3 MRP over chemically ebated concrete.
    •Total Steps 3.
    •Approx Cost: $2.50sf <


The flooring contractor chose option #2 to give them peace of mind that any moisture concerns were remedied as well as all contaminates were purged from the concrete below grade.


Complete blockage of any latent abatement chemicals in concrete. Job delivered on schedule and approx $3.50sf saved.

Unparalleled, Permanent Protection.

Our Low VOC, Resin-rich Proprietary Formula and Superior Cross-Linking Coatings & Sealants Reduce Total Cost of Ownership through:

Systems Used for Hospital: Asbestos Containment


Holding your expensive flooring products to the substrate and protecting them from the environment around them is the very MINIMUM we expect from our adhesive products and solutions. Versatility…

Products Used for Hospital: Asbestos Containment