Situation
Old adhesive contained asbestos and was removed and concrete was Chemically abated.
Options
- Shot blast or grind concrete then cap concrete with solid epoxy then apply primer to the epoxy.
• Total steps: 3
• Approx Cost: $5.00sf > - Install S3 MRP over chemically ebated concrete.
• Total Steps: 1
• Approx Cost: $2.00sf <
Solution
The flooring contractor chose to apply S3 MRP at 14,000sf/day. Then Self-leveling installed as necessary to the MRP.
Result
Complete blockage of any latent abatement chemicals in concrete. Job delivered on schedule and approx $3.00sf saved.
Unparalleled, Permanent Protection.
Our Low VOC, Resin-rich Proprietary Formula and Superior Cross-Linking Coatings & Sealants Reduce Total Cost of Ownership through:
Ease of Use
Faster Cure Times
Blocks Chemicals
Saves Money
